User guide

Chapter 9: Using DSView 3.0 Management Software Tools 359
NOTE: To remove selected firmware files, select the firmware file you wish to remove from the Firmware Files to
Update list (multiple firmware files may be selected by pressing Ctrl or Shift while clicking on the firmware file
names) and clicking Remove. The firmware files will be moved to the Available Firmware Files list.
c. To change the order in which firmware files are installed to the DSR switch or CPS
appliance, select the firmware files in the Firmware Files to Update list and use the up and
down arrows to move the selected firmware files up or down in the listing. Multiple
firmware files may be selected by pressing
Ctrl or Shift while clicking on the firmware
file names.
d. Click Next.
NOTE: When multiple firmware files are selected, the firmware on each DSR switch or CPS appliance will be
upgraded in the order shown in the Update list. A reboot will be automatically performed between each
firmware update.
3. The Type in Task Name window will appear.
Figure 9.8: Upgrade Appliance Firmware Wizard - Type in Task Name Window
a. Type a name for the upgrade firmware task (1-64 characters).
b. Click Next.
4. The Completed Successful window will appear.