User guide

356 DSView Installer/User Guide
6. Click Finish. The Units Tools window will appear.
Using DSR Switch and CPS Appliance Tools
The DSView software contains tools that allow you to perform the following actions on a DSR
switch or CPS appliance:
• Reboot a DSR switch or CPS appliance
• Upgrade the firmware on a DSR switch or CPS appliance
• Resynchronize a DSR switch or CPS appliance so that it reflects the current DSView
system configuration
• Save or restore the configuration of a DSR switch or CPS appliance
• Save or restore the database of local users in a DSR switch or CPS appliance
These tools are accessed from the Unit Overview window, which is displayed when you click on
the name of a DSR switch or CPS appliance.
To display the Unit Tools window:
1. From the DSView 3.0 Explorer window, click Units in the tab bar. Units will automatically be
selected in the top navigation bar and a list of links will appear in the side navigation bar.
2. From the side navigation bar, do one of the following:
•Click Appliances. The Appliances - All window will appear. You may also click on a link
below Appliances to display only specific types of DSR switches or CPS appliances in an
Appliances window.
•Click Sites and then click on a site link. A Units in Site window will appear.
• Click a custom field label and then the appropriate label that you specified for the DSR
switch or CPS appliance. The Units in Custom Fields window will appear.
• If the DSR switch or CPS appliance have been recently accessed, click Recently Accessed
to display the Recently Accessed Units window.
3. Click on the name of a DSR switch or CPS appliance. Overview will automatically be selected
in the side navigation bar and the Unit Overview window will appear. The tools will appear in
the Tools area of the window.