User guide

Chapter 9: Using DSView 3.0 Management Software Tools 355
NOTE: To remove selected target devices, select the target device you wish to remove from the Target Devices
to Merge list (multiple target devices may be selected by pressing Ctrl or Shift while clicking on the target device
names) and clicking Remove. The target devices will be moved to the Available Target Devices list.
c. To merge target devices in a particular order, select the target devices in the Target
Devices to Merge list and use the up and down arrows to move the selected target devices
up or down in the listing. Multiple target devices may be selected by pressing
Ctrl or Shift
while clicking on the target device names. Once the order has been specified, select Merge
missing properties to the target device based on the order of the devices in the “Target
Devices to Merge” list.
NOTE: The merged target devices will contain the name of the first target device in the Target Device to Merge
list. For example, if you are merging two target devices named TD1 and TD2 and TD2 is listed before TD1, the
merged target device will be named TD2.
d. Click Next.
4. The Confirm Target Device Merge window will appear.
Figure 9.5: Merge Target Devices Wizard - Confirm Target Device Merge Window
Click Next to confirm merging the connection paths into the specified destination target
device. See Managing connections to units on page 216 for information on connection paths.
5. The Completed Successful window will appear.