User guide

344 DSView Installer/User Guide
Viewing the access rights of user group members
Different built-in and user-defined user groups provide different access rights for units. Access
rights determine which actions you may or may not perform on a unit. You may view the units that
belong to a built-in or user-defined user group and the access rights provided to each by the built-in
or user-defined user group.
Target devices appear in the Target Device Access Rights window, while managed appliances
appear in the Appliance Access Rights window.
Customizing the Target Device Access Rights and Appliance Access Rights
windows
By default, the following columns display in the Target Device Access Rights window and may be
removed by clicking the Customize link:
• Viewer Sessions - Displays whether or not a DSView user may open a DSView session with a
target device using a Video Viewer window.
• Power Control - Displays whether or not a target device connected to an SPC device outlet
may be powered up, powered down or have its power cycled.
By default, the following columns display in the Appliance Access Rights window and may be
removed by clicking the Customize link:
• Reboot - Displays whether or not a DSView user assigned to the built-in user group may reboot
the DSR switch or CPS appliance.
• Flash Upgrade - Displays whether or not a DSView user assigned to the built-in user group
may FLASH upgrade the DSR switch or CPS appliance.
• Settings - Displays whether or not a DSView user assigned to the built-in user group may con-
figure the settings of the managed appliance.
• Local Users - Displays whether or not a DSView user assigned to the built-in user group may
configure the local user account of a DSR switch or CPS appliance.
See Using the Customize Link in DSView Software Windows on page 15 for information on using
the Customize link.
A check (
√) will appear in the corresponding column if the access right is available for the unit. The
column will be empty if the access right is not granted.
See Modifying unit access rights on page 161 for information on assigning and removing access
rights to and from units.