User guide

340 DSView Installer/User Guide
Figure 8.33: User Group Properties Window
2. Click Close when you are finished. The User Groups - Built-in window will appear.
Viewing and modifying user-defined user group properties
Each user-defined user group contains the following properties that you may view or modify:
• Name - The name of the user-defined user group.
• Type - The type of user group, which is always User Defined.
• Preemption Level - The preemption level assigned to the user-defined user group. See User
Preemption Levels on page 21 for information on preemption levels.
To view the properties of a user-defined user group:
1. From the User Groups - User Defined window, click on the name of a user group. Properties
will be automatically selected in the side navigation bar and the User Group Properties window
will appear. The side navigation bar includes the name of the user group at the top.
2. Do any of the following:
• To change the name of the user group, type a new name in the Name field.
• To change the preemption level, type a number (from 1-4) in the Preemption Level field,
or select it using the drop-down menu. The higher the number, the higher the preemption
level. For example, a DSView user with a preemption level of 4 can preempt DSView