User guide

326 DSView Installer/User Guide
4. From the side navigation bar, click Properties.
5. From the side navigation bar, click Custom Fields. The Unit Custom Fields window will
appear, including the custom field names defined in the previous procedure.
Figure 8.22: Unit Custom Fields Window
6. In the first field, type the name that you wish to associate with the first label defined for the
DSView system (0-64 characters). You may also leave the field blank.
7. In the second field, type the name that you wish to associate with the second label defined for
the DSView system (0-64 characters). You may also leave the field blank.
8. In the third field, type the name that you wish to associate with the third label defined for the
DSView system (0-64 characters). You may also leave the field blank.
9. Click Save to save your changes.
10. Click Close. The Appliance - All window will appear. The side navigation bar will now
include the names of the first and second custom fields defined in steps 6 and 7 instead of Cus-
tom Field Labels.
NOTE: The third custom field, as well as the first and second custom fields, may be displayed in the content area
by clicking Customize and turning them on.