User guide

Chapter 8: Grouping 309
By default, the Location column is not displayed in any of the windows. You may display the
Location column by clicking Customize and adding the field. See Using the Customize Link in
DSView Software Windows on page 15 for information on using the Customize link.
The steps for using a location are:
1. Add the location to the DSView system
2. Associate units with the location.
Viewing, adding, modifying and deleting locations
You may view, add, delete or change the name of a location in the DSView system using the
Locations window.
NOTE: You may customize the number of locations that appear in the Locations window by clicking the
Customize link. See Using the Customize Link in DSView Software Windows on page 15 for information using
the Customize link.
To display the Locations window and view locations:
1. From the DSView 3.0 Explorer, click Units in the tab bar.
2. From the top navigation bar, click Locations. Locations is automatically selected in the side
navigation bar and the Locations window will appear.
Table 8.5: Windows Containing a Location Column
Window Link Clicked in Side Navigation Bar
Units in Site window Sites
Target Devices window A link under Target Devices
Appliances window A link under Appliances
Units in Group window Groups
Units in Custom Fields window A link under Custom Field
Recently Accessed Units window Recently Accessed