User guide

Chapter 1: Product Overview 11
You may also connect to a target device attached to a DSR switch in either a normal (shared) or
exclusive (private) KVM DSView session using the Unit Overviews window. See Modifying unit
overview information on page 147 for more information.
Configuring units
Units may be configured in the DSView 3.0 Explorer by clicking Units in the tab bar and then
clicking on a unit name in the Unit Views window. When you click on a unit’s name, the
following occurs:
• The Unit Overview window will appear
• The name of the unit will appear at the top of the side navigation bar.
• Links will appear in the side navigation bar that enable you to configure your unit.
See Managing Units on page 147 for more information.
Unit icons
By default, DSView Administrators and Appliance Administrators may edit unit settings, including
which icon is associated with a target device.
The icon associated with the target device will appear to the left of the name in a Target Devices
window. See Modifying unit overview information on page 147 for more information.
The icons associated with managed appliances are predefined and may not the modified. These
icons are listed in Figure 1.3.
Table 1.3: Managed Appliance Icons
Icon Description
CPS appliance
DSR switch
EVR1500 environmental monitor
Generic appliance