User guide

295
CHAPTER
8
Grouping
About Grouping
The DSView 3.0 Explorer automatically groups managed appliances (DSR switches, CPS serial
over IP network appliance, EVR1500 environmental monitor and control appliances and generic
appliances) by the type of appliance (CPS 1610, DSR1021 and so on). Target devices are
automatically grouped based on the type to which they are assigned.
You may view the target devices in your DSView 3.0 management software system by clicking
Units in the tab bar. Units will automatically be selected in the top navigation bar, Target Devices -
All will automatically be selected in the side navigation bar and the Target Devices - All window
will appear. You may then click a target device type beneath Target Devices in the side navigation
bar to display a Target Devices window containing only target devices of the particular type.
Managed appliances may be displayed by clicking Appliances in the side navigation bar. All is
automatically selected and the Appliances - All window will appear. You may then click a DSR
switch or CPS appliance type, EVR1500 or Generic beneath Appliances in the side navigation bar
to display an Appliances window containing only managed appliances of the particular type.
NOTE: Recently accessed units may be viewed by clicking the Recently Accessed link in the side navigation bar.