User guide

294 DSView Installer/User Guide
The current state of the SPC device outlet appears in the Current Power Status area of the dialog
box. As you change the power state, the information is updated in real time.
NOTE: Depending on the configuration of an SPC device outlet, an SPC device outlet may not immediately
respond to a power change request (for example, an SPC device outlet may be configured to remain off for a
specific period of time, and so on).
To power up a target device:
1. Select Options - Power from the Video Viewer main window. The Power Control dialog box
will appear.
2. Click On.
3. Click Close to dismiss the dialog box.
To power down a target device:
1. Select Options - Power from the Video Viewer main window. The Power Control dialog box
will appear.
2. Click Off.
3. Click Close to dismiss the dialog box.
To power cycle a target device:
1. Select Options - Power from the Video Viewer main window. The Power Control dialog box
will appear.
2. Click Cycle.
3. Click Close to dismiss the dialog box.
Closing a Telnet Appliance Session
To close a Telnet/SSH applet session:
Select File - Exit from the Telnet/SSH applet window.