User guide

DSView Installer/User Guide 293
The entire contents of the history buffer are copied to the system clipboard. You may then paste the
clipboard contents into this or another application.
NOTE: The entire history buffer is copied to the system clipboard, regardless of the amount of data in it.
To paste system clipboard contents:
1. Place textual data on the system clipboard, using a text editor or other application.
2. Initiate a DSView software Telnet/SSH applet session.
3. At the point where you wish to paste the clipboard contents, select Options - Paste from the
menu bar.
-or-
Click the Paste icon in the toolbar.
To print a Telnet/SSH applet window screen:
1. Select Options - Print Screen from the menu bar.
-or-
Click the Print Screen icon in the toolbar.
2. The operating system’s print dialog box appears. Make the appropriate settings. The screen
contents will then be sent to the printer.
To print a screen of Telnet/SSH applet window session history data:
1. Select View - History from the menu bar.
-or-
Click the History icon in the toolbar.
2. Select Options - Print Screen from the menu bar.
-or-
Click the Print Screen icon in the toolbar.
3. The operating system’s print dialog box appears. Choose the appropriate settings. The screen
contents will then be sent to the printer.
Power Controlling Target Devices (Serial Session Only)
NOTE: A DSView user must have DSView Administrator privileges to control the power of a target device.
If a target device attached to a CPS810 or CPS1610 port is connected to an SPC device outlet and
the target device has been accessed in a serial session, you may power up, power down or cycle
(power down and then power up) the target device using the Power Control dialog box. The
Options - Power menu option will not be available if the target device cannot be power controlled
using the DSView software, or if the DSView user does not have power control privileges
(specified by selecting Reboot Appliance in the Unit Access Rights window).