User guide

280 DSView Installer/User Guide
* When the Terminal Emulation mode is VT52, the Arrow keys are interpreted as indicated in this
column, regardless of the value in the Arrow Keys list.
To change the DSView software Telnet/SSH applet Arrow key sequences:
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
The Session Properties dialog box will appear.
2. Click the Terminal tab.
3. In the Arrow Keys list, choose either VT100 or ANSI. The default value is VT100.
Changing the terminal type
The terminal type is used during Telnet session negotiation. You may change this value at any time.
To change the terminal type:
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
The Session Properties dialog box will appear.
2. Click the Terminal tab.
3. In the Terminal Type box, enter a value of up to 40 characters, beginning with a letter and end-
ing with a letter or digit. Valid characters are the letters A-Z, digits
Ø-9, forward slash, dash,
left parenthesis and right parenthesis.
NOTE: When you are connected to a CPS appliance or generic appliance, the terminal type must be entered in
the Terminal Type field exactly as shown in the following table for each Terminal Emulation mode.
Table 7.3: Arrow Key Sequences
Key VT100 ANSI VT52 *
Up Arrow <Esc> [A <Esc> OA <Esc> A
Down Arrow <Esc> [B <Esc> OB <Esc> B
Right Arrow <Esc> [C <Esc> OC <Esc> C
Left Arrow <Esc> [D <Esc> OD <Esc> D