User guide

DSView Installer/User Guide 279
Changing the terminal window size
The Terminal Size lists specify the number of rows and columns to display in the virtual terminal
window. These values determine the window height and width.
To change the DSView Telnet terminal window size:
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
The Session Properties dialog box will appear.
2. Click the Terminal tab.
3. In the Rows list, choose a value of 24 or 48. The default value is 24.
4. In the Columns list, choose a value of 80 or 132. The default value is 80.
Changing the Terminal Emulation mode
You may set the DSView software Telnet/SSH applet to emulate ASCII, VT100, VT100+, VT102,
VT52, VT220 or VT320 terminals, depending on the connected device. Terminal Emulation on
page 444 contains encoding and decoding information for each of the terminal emulation types.
To change the DSView software Telnet/SSH applet Terminal Emulation mode:
1. Select Options - Session Properties from the menu bar.
-or-
Click the Session Settings icon in the toolbar.
The Session Properties dialog box will appear.
2. Click the Terminal tab.
3. From the Terminal Emulation list, choose one option: ASCII, VT100, VT100+, VT102, VT52,
VT220 or VT320. The default value is VT100.
NOTE: When connecting to a CPS appliance or generic appliance, the terminal type setting must match the
terminal emulation type.
Changing Arrow key sequences
When the Terminal Emulation mode is VT100, VT100+, VT102, VT52, VT220 or VT320, you
may specify either VT100 or ANSI
Arrow key sequences. The following table lists the Arrow keys
and the sequences transmitted for each.