User guide

Chapter 6: Using the Video Viewer Window 269
To copy a macro group:
NOTE: Macro groups cannot be copied if you are using the DSR Remote Operations Software.
1. Select Macros - Configure - Macro Groups from the Video Viewer window menu.
-or-
Click the Macro Groups button.
The Macro Groups dialog box appears.
2. Select one of the following:
• Select All to view both personal and global macros.
• Select Personal to view personal macros only.
• Select Global to view global macros only.
3. Select the desired macro from the Defined Groups list and then click Copy. The Copy Macro
Group dialog box will appear.
4. Type a 1-32 character name in the Name of copied macro group field.
5. Select whether you wish to make the copied macro group a personal or global macro from the
Macro Type area.
6. Click OK to copy the macro group. The Copy Macro Group dialog box is dismissed and the
copied macro group will appear in the Macro Groups dialog box.
-or-
Click Cancel to cancel the action.
7. Click Close to exit the Macro Groups dialog box.
To change the macro group to be displayed on in the Macros menu:
NOTE: The macro group displayed on the Macros menu cannot be changed if you are using the DSR Remote
Operations Software.
1. Select Macros - Configure - Macro Groups from the Video Viewer window menu.
-or-
Click the Macro Groups button.
The Macro Groups dialog box appears.
2. Select one of the following:
• Select All to view both personal and global macro groups.
• Select Personal to view personal macro groups only.
• Select Global to view global macro groups only.
3. Select the macro group to be display from the Defined Groups list box.