User guide

Chapter 4: Managing Units 217

Figure 4.73: Appliance Connections Window

NOTE:The connections of EVR1500 environmental monitors and generic appliances may not be viewed.

Connections typically appear in a format similar to the following for connections to target devices,

cascade switches and SPC devices:

<DSR Switch or CPS Appliance Name>(<Port>)

→ <EID Number> → <Target Device>

<DSR Switch or CPS Appliance Name>(<Port>)

→ <EID Number> → switch one

<Port>

→<Target Device>

<DSR Switch or CPS Appliance Name>(<Port>)

→ <SPC Device> (<Port>) →

The following examples illustrate typical connections that may appear in your DSView software.

Example: Target device connections

dsr-1021-huntsville(3)

→520255-044F6F→td-john

dsr-1021-huntsville(4)

→520255-03F757→td-mary

dsr-1021-huntsville(8)

→520255-016BE0→td-tim

In the above example, there are three target devices connected to ports 3, 4 and 8 of a DSR1021

switch named dsr-1021-huntsville. The DSR1021 switch ports are connected to the three target

devices using DSRIQ modules. The DSRIQ with an EID of 520255-044F6F is connected to target