User guide

Chapter 4: Managing Units 199
To modify the DSView session settings on a DSR switch:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click Sessions. Active will be selected in the side navigation
bar and the Appliance Sessions window will appear.
3. Click Settings in the side navigation bar. The Appliance Settings - Sessions - Settings window
will appear.
Figure 4.58: Appliance Settings - Sessions - Settings Window (DSR Switch)
4. Click Enable activity timeout and use the arrows to specify a time-out value (from 1-90
minutes) that the DSR switch will wait until the DSView user must log back in to the DSR
switch.
5. Specify an encryption level for the keyboard, mouse and video:
• DES - SSL Single DES Encryption
• 3DES - SSL Triple DES Encryption
• 128-Bit SSL - 128-bit encryption which used an ARCFOUR (RC4
®
) SSL cipher.
NOTE: At least one encryption level must be specified for the keyboard and mouse.