User guide

198 DSView Installer/User Guide
To view and modify the DSView session settings on a CPS appliance:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click Sessions. Active will be selected in the side navigation
bar and the Appliance Sessions window will appear.
3. From beneath Sessions, click Settings. The Appliance Settings - Sessions - Settings window
will appear including SSH settings for the CPS appliance.
Figure 4.57: Appliance Settings - Sessions - Settings Window (CPS Appliance)
4. Using the drop-down menu, specify the how the most recent 64K bytes of online and offline
data (history) from a serial port will be controlled:
• Auto - Select this option to display the history buffer content to a Telnet window.
• Hold - Select this option to save the buffer contents. To view the contents, you must access
the CPS appliance CLI and use the Port History command to view the port’s history
buffer content.
5. Click Enable activity timeout and use the arrows to specify a time-out value (from 1-90 min-
utes) that the CPS appliance will wait until the DSView user must log back in to the
CPS appliance.
6. Click Save to save your changes.
7. Click Close. The Unit Views window will appear.