User guide

192 DSView Installer/User Guide
Figure 4.53: Appliance CLI Port Settings Window
4. Using the drop-down menu, specify the CPS appliance port you wish to use for CLI
connections to a Serial device. You may choose Unassigned if you do not wish to assign a spe-
cific port as the CLI port.
5. Using the drop-down menu, specify one of the following terminal types to use for a
CLI connection:
•ASCII
• IBM 3151
• IBM 5250
• None
• VT-100
• VT-102
• VT-220
• VT-320
•VT-52
• Wyse 50
6. Type a modem initialization string that will be used by the CPS appliance for dial-in serial CLI
access to an attached serial device. The default value is ATE0V1 SO=1.
NOTE: If you wish to access a serial device using a modem connection, you must specify PPP settings.