User guide

Chapter 4: Managing Units 185
Figure 4.49: SPC Socket Settings Window
7. Type a new name for the socket.
8. From the drop-down menu, specify the minimum amount of time that the SPC socket should
be powered up.
9. From the drop-down menu, specify a minimum amount of time that the SPC socket should be
powered down.
10. From the drop-down menu, specify whether you wish to enable wake-up for the SPC
device outlet.
11. Click Save to save your changes.
12. Click Close. The SPC Sockets window will appear.
13. Click Close. The SPC Devices Attached to Appliance window will appear.
14. Click Close. The Unit Views window will appear.
To power up, power down or cycle the power of an SPC device outlet:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click Ports.
3. From beneath Ports, click SPC. The SPC Devices Attached to Appliance window will appear.
4. Click on the name of an SPC device. Settings will be selected in the side navigation bar and the
SPC Settings window will appear. The name of the outlet and SPC device will also appear
beneath the DSR switch or CPS appliance name in the side navigation bar.