User guide

184 DSView Installer/User Guide
Figure 4.48: SPC Sockets Window
NOTE: When the IP address of a DSR switch or CPS appliance attached to an SPC device outlet has been
modified, it may be necessary to reboot the DSR switch or CPS appliance. The DSView software will display a
Reboot Required icon in the top left corner of the SPC Sockets window. Click the icon to reboot the DSR switch
or CPS appliance.
6. Click on an SPC socket. The SPC Socket Settings window will appear and the name of the
socket will appear under the SPC device in the side navigation bar.