User guide

Chapter 4: Managing Units 183
Figure 4.47: SPC Settings Window
5. Type a new description for the SPC device.
6. Type a new total minimum load for the SPC, in amps, or use the arrow buttons to specify a
new value.
7. Type a new total maximum load for the SPC, in amps, or use the arrow buttons to specify a
new value.
8. Type a polling rate, or use the arrow buttons to specify a new value.
9. Click Save to save your changes.
10. Click Close. The SPC Devices Attached to Appliances window will appear.
11. Click Close. The Unit Views window will appear.
To view or customize SPC device outlet settings:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click Ports.
3. From beneath Ports, click SPC. The SPC Devices Attached to Appliance window will appear.
4. Click on the name of an SPC device. Settings will be selected in the side navigation bar and the
SPC Settings window will appear. The name of the outlet and SPC device will also appear
beneath the DSR switch or CPS appliance name in the side navigation bar.
5. From the side navigation bar, click Sockets. The SPC Sockets window will appear.