User guide

182 DSView Installer/User Guide
• Off Fail - The DSView software detects that the SPC device outlet is powered up, but the
SPC device outlet is powered down.
• No Response - The DSView software is not receiving a response from the SPC
device outlet.
• Minimum On (Seconds) - Displays the minimum amount of time that the SPC device outlet
will be powered up.
• Minimum Off (Seconds) - Displays the minimum amount of time that the SPC device outlet
will be powered down.
Wake - Displays the wake-up state of the SPC device outlet. The wake-up state indicates the state
that the port will go into when the SPC device is powered up during normal operation or when
power is restored after an outage. When power is first supplied to the SPC device, all outlets are
initially off. The ports are then sequenced on in 2-second increments. Outlets set to a wake-up state
of Off will remain off. Outlets set to a wake-up state of On will be turned on (waken from its
sleep state)
See Using the Customize Link in DSView Software Windows on page 15 for information on using
the Customize link.
To view or customize SPC device settings:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click Ports.
3. From beneath Ports, click SPC. The SPC Devices Attached to Appliance window will appear.
4. Click on the name of an SPC device. Settings will be automatically selected in the side naviga-
tion bar and the SPC Settings window will appear. The name of the SPC device will also
appear beneath the DSR switch or CPS appliance name in the side navigation bar.