User guide

180 DSView Installer/User Guide
Managing SPC device port settings
SPC devices and their outlets are managed using the SPC port appliance setting. If an SPC device is
online, you may choose to view or customize settings or perform power control operations,
NOTE: When using an SPC device with a CPS appliance, you must specify that the CPS appliance serial port is
configured as an SPC device port. See Managing Serial port settings (CPS Appliances only) on page 186 for
more information.
To modify an SPC device, you must first click on the name of the managed appliance to which it is
attached in the Unit Views window. All SPC devices associated with the DSR switch or CPS
appliance will appear in the SPC Devices Attached to Appliance window.
Figure 4.46: SPC Devices Attached to Appliance Window
Click on an SPC device to modify the device itself or individual SPC device outlets using the links
in the side navigation bar. Settings for the entire SPC device may be modified by clicking Settings
in the side navigation bar, which displays the SPC Settings window. Individual SPC device outlets
may be modified by clicking Sockets in the side navigation bar, which displays the SPC
Sockets window.
NOTE: Target devices attached to the DSR switch or CPS appliance are not rebooted.