User guide

Chapter 4: Managing Units 175
The following port setting may be viewed and modified for CPS appliances and DSR switches:
• SPC - See Managing SPC device port settings on page 180 for information on modifying SPC
device port settings.
The following port settings may be viewed and modified for all CPS appliances:
•Serial
•CLI
To delete offline DSRIQ modules (DSR switches only):
NOTE: An offline adaptors will appear with a red circle and an “X” to the left of its EID. An online adaptor will
appear with a green circle to the left of its EID.
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click Ports. IQ Adaptors is automatically selected in the side
navigation bar and the Appliance IQ Modules window will appear.
Figure 4.42: Appliance IQ Modules Window
3. Click Delete Offline. A confirmation dialog box will appear.
4. Click Yes to delete the DSRIQ modules
-or-
Click No to cancel the action.