User guide

172 DSView Installer/User Guide
To specify SNMP destination settings for a DSR switch or CPS appliance:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click SNMP.
3. From beneath SNMP, click Destinations. The Appliance SNMP Destination Settings window
will appear.
Figure 4.39: Appliance SNMP Destination Settings Window
4. Type the IP addresses, in standard dot notation (xx.xx.xx.xx) of up to four SNMP destinations.
5. Click Save to save your changes.
6. Click Close. The Unit Views window will appear.