User guide

Chapter 4: Managing Units 171
To specify SNMP community settings for a DSR switch or CPS appliance:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click SNMP.
3. From beneath SNMP, click Community. The Appliance SNMP Community Settings window
will appear.
Figure 4.38: Appliance SNMP Community Settings Window
4. Type the SNMP community name for reading.
5. Type the SNMP community name for writing.
6. Type the SNMP community name for SNMP traps.
7. Click Save to save your changes.
8. Click Close. The Unit Views window will appear.