User guide

170 DSView Installer/User Guide
To enable or disable SNMP manager settings for a DSR switch or CPS appliance:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click SNMP.
3. From beneath SNMP, click Managers. The Appliance SNMP Manager Settings window
will appear.
Figure 4.37: Appliance SNMP Manager Settings Window
4. Type the IP addresses, in standard dot notation (xx.xx.xx.xx) of up to four SNMP managers.
5. Click Save to save your changes.
6. Click Close. The Unit Views window will appear.