User guide

Chapter 4: Managing Units 169
To enable or disable SNMP system settings for a DSR switch or CPS appliance:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings, click SNMP. System is automatically selected in the side
navigation bar and the Appliance SNMP System Settings window will appear.
Figure 4.36: Appliance SNMP System Settings Window
3. Select Enabled the drop-down menu to specify logging of SNMP traps over UDP port 161.
4. If you wish, modify the name and description of the DSR switch or CPS appliance and type a
contact in the fields.
5. Click Save to save your changes.
6. Click Close. The Unit Views window will appear.