User guide

Chapter 4: Managing Units 167
Modifying managed appliance authentication server settings
The authentication server settings specify the IP addresses of the DSView Servers used for
authentication. You may define the addresses of up to four DSView Servers.
To define the IP addresses of authentication servers for a DSR switch or CPS
appliance:
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings in the side navigation bar, click Authentication Servers. The
Appliance Authentication Servers Settings window will appear.
Figure 4.35: Appliance Authentication Servers Settings Window
3. Type an IP address, in standard dot notation (xx.xx.xx.xx) of up to four authentication servers.
4. Click Save to save your changes.
5. Click Close. The Unit Views window will appear.