User guide

166 DSView Installer/User Guide
To modify the network settings of a DSR switch or CPS appliance
1. From the side navigation bar, click Appliance Settings.
2. From beneath Appliance Settings in the side navigation bar, click Network. The Appliance
Network Settings window will appear.
Figure 4.34: Appliance Network Settings WIndow (DSR Switch)
3. Type a new IP address, in standard dot notation (xx.xx.xx.xx) for the DSR switch or
CPS appliance.
4. Type a new subnet, in standard dot notation (xx.xx.xx.xx) for the DSR switch or
CPS appliance.
5. (Optional) Type a new gateway, in standard dot notation (xx.xx.xx.xx) for the DSR switch or
CPS appliance.
If you are modifying the network properties of a DSR switch, continue to step 6.
If you are modifying the network properties of a CPS appliance, go to step 8.
6. Use the drop-down menu to specify a LAN speed.
7. Use the drop-down menu to specify if you wish for DHCP (DSR switches) or BOOTP (CPS
appliances) to be enabled or disabled.
8. Use the drop-down menu to specify if you wish ICMP ping reply to be enabled or disabled.
9. Click Save to save your changes.
10. Click Close. The Unit Views window will appear.