User guide

162 DSView Installer/User Guide
Figure 4.32: Unit Access Rights Window (DSR Switches and CPS Appliances)
Once you have defined the DSView users and user groups that you wish to have access rights to the
unit, you may specify the specific access rights to grant. For example, you may wish to allow a
DSView user to configure settings on a DSR switch or CPS appliance but not allow them to reboot
the DSR switch or CPS appliance, or you may wish to allow a DSView user assigned Appliance
Administrator privileges on the target devices to establish a Video Viewer session but not allow the
DSView user to perform power control operations.
Access rights may also be specified for all units in the DSView system, or for a specific unit.
See Managing DSView Users using User Groups on page 329 for information on user groups. See
Launching a KVM session on page 242 for information on establishing a Video Viewer session,
Modifying unit overview information on page 147 for information for performing power control
using the DSView 3.0 Explorer, Power Controlling Target Devices on page 270 for information on
performing power control using a Video Viewer Window and Power Controlling Target Devices
(Serial Session Only) on page 293 for information on performing power control using a
Telnet/SSH applet.
To add or remove users and user groups to or from units:
1. From a Unit Views window, click on a unit name to add users or user groups to a single unit.
Overview will automatically be selected in the side navigation bar and the Unit Overview win-
dow will appear. Continue to step 2.