User guide

158 DSView Installer/User Guide
The additional network properties may be modified for target devices, EVR1500 environmental
monitors and generic appliances:
• The Telnet port used for communication with the DSView Server
• The URL used for web browser connections
NOTE: Defining incorrect information may cause network connection errors.
To modify the network properties of a target device:
1. From the side navigation bar, click Properties.
2. From the side navigation bar, click Network. The Unit Network Properties window will appear.
Figure 4.28: Unit Network Properties (Target Device)
3. Type type the address or the fully qualified domain name for the target device.
4. Type Telnet port to use for Telnet connections to the target device. If this field is left blank,
Telnet will not be enabled for the target device.
5. Type the URL for a web browser connection to the target device.
6. Select the DSView Server that is in charge of the target device.
7. Click Save to save your changes.
8. Click Close. The Unit Views window will appear including any modifications.