User guide

154 DSView Installer/User Guide
Figure 4.24: Unit Location Properties Window
3. Type or use the drop-down list to select the site where the unit is located.
4. Type or use the drop-down list to select the department where the unit is located.
5. Type or use the drop-down list to select the location where the unit is located.
6. Click Save to save your changes.
7. Click Close. The Unit Views window will appear including any modifications.
Modifying unit contact properties
The contact properties are information that identifies the contacts for a unit and appear in the Unit
Views window. Assigning contact properties may be helpful for quickly identifying a person to
notify if an issue or question arises about a particular unit.
You may modify the following contact properties:
• Primary contact and phone number
• Secondary contact and phone number
NOTE: Contact properties should be kept up-to-date.