User guide

136 DSView Installer/User Guide
6. The Select Options window will appear.
Figure 4.9: Add Unit Wizard - Select Options Window
a. Click Enable Secure Mode if you wish for the DSR switch or CPS appliance to only be
accessible by this DSView system.
b. Click Prevent Target Devices that contain default names from being added if you wish to
prevent the adding of any target devices whose port names have not been modified from
the factory defaults of the DSR switch or CPS appliance.
c. Click Allow Target Devices with the same name to be merged into a single Target Device
if you wish to merge a target device that has multiple connections into a single target
device. For example, a target device may be connected to a both a DSR switch and an SPC
device outlet connected to a CPS appliance.
d. Click Next.