User guide

Chapter 3: DSView Server 117
2. Change any of the following network settings:
a. Type a new computer name to use as the Spoke DSView Server.
b. Type a new address in standard dot notation (xx.xx.xx.xx) for the Spoke DSView Server.
c. Type a new port number for the Spoke DSView Server.
3. Click Save to save your changes.
4. Click Close. The Spoke Servers window will appear.
Managing Hub and Spoke DSView Server certificates
NOTE: Certificates may only be viewed by DSView Administrators and User Administrators.
When a Spoke DSView Server is registered with a Hub DSView Server, a certificate trust
relationship is established between the two servers. Certificate information must match on the Hub
DSView Server and Spoke DSView Servers for communication to take place between the servers.
If the Spoke DSView Server certificate is subsequently changed, a certificate mismatch will occur.
The following operating sequences describe how to resolve mismatched Hub and Spoke DSView
Server certificates.
To update the certificate of a Spoke DSView Server on the Hub DSView Server:
1. From the Hub DSView Server’s DSView 3.0 Explorer, click System. DSView Server is auto-
matically selected in the top navigation bar and the name of the Hub DSView Server appears at
the top of the side navigation bar.
2. From the side navigation bar, click Spoke Servers. The Spoke Servers window will appear.
3. From the Spoke Servers window, click Certificate. The Spoke Server Certificate window will
appear including information about the Spoke DSView Server certificate (Actual Certificate)
and the certificate registered for this Spoke DSView Server on the Hub DSView Server
(Registered Certificate).
4. The window displays the certificate on the Spoke DSView Server and the certificate registered
on the Hub DSView Server.