User guide

116 DSView Installer/User Guide
Modifying Spoke DSView Server network settings
You may change the network settings that the Hub DSView Server uses to communicate with the
Spoke DSView Server. Changing these settings does not affect the actual configuration for the
Spoke DSView Server.
You may modify the following network settings:
• The name of the computer being used as a Spoke DSView Server.
• The network address of the Spoke DSView Server.
• The port number used by the Hub DSView Server for communicating with the Spoke DSView
Server.
To modify Spoke DSView Server network settings:
NOTE: Spoke DSView Server network settings may need to be modified by DSView Administrators when Spoke
Network Settings are changed and the Hub DSView Server did not automatically detect the changes.
NOTE: When modifying the network settings, ensure that a port mismatch will not occur between the Hub
DSView Server and Spoke DSView Server.
1. From the Spoke Servers window, click on the name of the Spoke DSView Server whose net-
work properties you wish to change. The Spoke Server Network Properties window
will appear.
Figure 3.48: Spoke Server Network Properties Window