User guide

108 DSView Installer/User Guide
Figure 3.43: Register Spoke Server Wizard - Type in Hub DSView Server Address Window
a. Type the IP address of the Hub DSView Server in standard dot notation (xx.xx.xx.xx).
-or-
Type the domain name of the Hub DSView Server.
b. Type the port number for the Hub DSView Server.
NOTE: If the default Hub DSView Server port value (443) is modified, you must specify the modified port number
when registering a Spoke DSView Server so that register requests will be sent to the correct port on the Hub
DSView Server. For example, if the IP address of the Hub DSView Server is 10.0.0.1 and the port number is
changed to 444, the following string must be typed in the Address field of the Register Spoke Server Wizard:
https://10.0.0.1:444/dsview
c. Click Next.