User guide

106 DSView Installer/User Guide
The following field is always displayed in the Spoke Servers window:
• Name - The name of the DSView Spoke Server.
The following fields are displayed in the Spoke Servers window. Their display may be turned off
using the Customize link:
• Address - Displays the IP address, in standard dot notation (xx.xx.xx.xx) of the Spoke
DSView Server.
• HTTPS - Displays the HTTPS port used by the Hub DSView Server to communicate with the
Spoke DSView Server.
• Status - Displays if the Spoke DSView Server is responding or not responding.
See Using the Customize Link in DSView Software Windows on page 15 for information on using
the Customize link.
To add a Spoke DSView Server:
1. Install the DSView software on the computer you wish to use as a Spoke DSView Server. See
Installing the DSView 3.0 Management Software on page 27 for more information.
2. Configure the computer as a Spoke DSView Server. See Configuring the DSView Software on
page 36 for more information.
To register a Hub DSView Server as a Spoke DSView Server:
NOTE: Only DSView Administrators may register a Hub DSView Server as a Spoke DSView Server.
1. From the DSView 3.0 Explorer, click the System tab.
2. From the top navigation bar, click DSView Server. The side navigation bar will include the
name of the server to which you are logged in.