User guide

98 DSView Installer/User Guide

•Click Use SSL in Certificate-based Trust Mode to use SSL encryption for data transmis-

sion. The DSView software will approve the server and then the certificate before trans-

mitting data. This SSL method provides maximum security and automatically sets the Port

Number field to a default port number of 636.

7. Click Save to save your changes.

If you selected Use SSL in Certificate-based Trust Mode, Certificates will appear in the side

navigation bar. Continue to step 8.

If you selected Do Not Use SSL or Use SSL in Trust All Mode, go to step 15.

8. Click Certificates. The Authentication Service Certificate Management - LDAP window will

appear and list al servers that belong to the domain.

Figure 3.36: Authentication Service Certificate Management - LDAP Window

9. Click the checkbox to the left of the server IP address(es) for which you want to

-or-

Click the checkbox to the left of Name at the top of the list to select all server IP addresses

listed in the window that you wish to register.