User guide

Chapter 3: DSView Server 97
2. From the side navigation bar, click Connection. The Authentication Service Connection Set-
tings - LDAP window will appear.
Figure 3.35: Authentication Service Connection Settings - LDAP Window
3. Type a name in the Service Name field to change the name of the service that appears in the
Name column of the User Authentication Services window.
4. Type the address of the LDAP host, in dot notation format (xx.xx.xx.xx) in the Host
Address field.
5. Type the number of the port you with to use for connecting to the LDAP host in the Port Num-
ber field.
6. Specify a Secure Socket Layer (SSL) Encryption mode:
•Click Do Not Use SSL if you wish for authentication to be performed using unencrypted
clear text instead of SSL encryption. This method is the least secure and automatically sets
the Port Number field to a default port number of 389.
•Click Use SSL in Trust All Mode to use SSL encryption for data transmission. All server
certificates will be trusted and automatically accepted by the DSView software for trans-
mitting data. This SSL method provides medium security and automatically sets the Port
Number field to a default port number of 636.
NOTE: Use SSL in Trust All Mode is not recommended for wide area networks (WANs).