User guide

Chapter 3: DSView Server 93
5. Specify a Secure Socket Layer (SSL) Encryption mode:
•Click Do Not Use SSL if you wish for authentication to be performed using unencrypted
clear text instead of SSL encryption. This method is the least secure.
•Click Use SSL in Trust All Mode to use SSL encryption for data transmission. All server
certificates will be trusted and automatically accepted by the DSView software for
transmitting data. This SSL method provides medium security.
NOTE: Use SSL in Trust All Mode is not recommended for wide area networks (WANs).
•Click Use SSL in Certificate-based Trust Mode to use SSL encryption for data
transmission. The DSView software will approve the server and then the certificate before
transmitting data. This SSL method provides maximum security.
6. Click Save to save your changes.
If you selected Use SSL in Certificate-based Trust Mode, Certificates will appear in the side
navigation bar. Continue to step 7.
If you selected Do Not Use SSL or Use SSL in Trust All Mode, go to step 14.
7. Click Certificates. The Authentication Service Certificate Management - AD window will
appear and list all servers that in the domain.
Figure 3.32: Authentication Service Certificate Management - AD Window