User guide

86 DSView Installer/User Guide
8. The Select Browsing Method window will appear.
Figure 3.26: Add Authentication Service Wizard - Select Browsing Method Window
Click Browse Anonymously to browse users on the external LDAP authentication server.
-or-
Click Browse with User Credentials to browse users on the external LDAP authentication
based on credentials configured on the server. If this option is selected, do the following:
a. Type a log in ID in the User Name field in the format <name>=<value> with each name
and value pair separated by a comma (,). The default log in is
cn=Manager,o=Avocent,c=US. The most specific log in IDs should be entered first.
NOTE: The log in ID must be entered in case-sensitive text if the LDAP server is set up to support
case-sensitive filenames.
b. Type the password for the LDAP user account in the Password field.
c. Click Next.
9. The Establish Connection with Authentication Service window will briefly appear. If the
external authentication service is added successfully, the Completed Successful window
will appear.
10. Click Finish. The User Authentication Services window will appear with the new
service listed.