User guide

82 DSView Installer/User Guide
3. The Specify LDAP Connection Settings window will appear.
Figure 3.22: Add Authentication Service Wizard - Specify LDAP Connection Settings Window
a. Type the address of the LDAP host, in dot notation format (xx.xx.xx.xx) or DNS host
name in the Host Address field.
b. Type the number of the port you with to use for connecting to the LDAP host in the Port
Number field.
c. Specify a Secure Socket Layer (SSL) Encryption mode:
•Click Do Not Use SSL if you wish for authentication to be performed using
unencrypted clear text instead of SSL encryption. This method is the least secure and
automatically sets the Port Number field to a default port number of 389.
•Click Use SSL in Trust All Mode to use SSL encryption for data transmission. All
server certificates will be trusted and automatically accepted by the DSView software
for transmitting data. This SSL method provides medium security and automatically
sets the Port Number field to a default port number of 636.
NOTE: Use SSL in Trust All Mode is not recommended for wide area networks (WANs).
•Click Use SSL in Certificate-based Trust Mode to use SSL encryption for data trans-
mission. The DSView software will approve the server and then the certificate before
transmitting data. This SSL method provides maximum security and automatically
sets the Port Number field to a default port number of 636.