User guide

3. Click Power Settings in the side navigation bar. The Power Settings Properties window
will open.
4. Enter a number of seconds between 0 and 60 to specify the amount of time for the DSView
server to wait for power operations to complete. The preset value is 60 seconds.
5. Enter a number of seconds between 0 and 60 to specify the amount of time for the DSView
server to wait for power cycle operations. The preset value is 15 seconds.
6. Click Save.
Profiles
Profile information contains features and tasks that may affect actions when using the DSView
software. These include:
• User options
• Color scheme
• Changing a password
• Choice of serial session application
• Specifying a user certificate
• Specifying a user SSH key
NOTE: You may also set up KVM session profiles for use with the Video Viewer; see KVM Session Profiles on page
290.
Changing user options
To change user options:
1. Click the Profile tab. The Options window will open.
2. In the Navigation Tree Behavior area, select one option:
• If you select Automatically collapse navigation tree nodes, a currently-expanded tree
node will be collapsed when you select another tree node.
• If you select Preserve navigation tree state, a currently-expanded tree node will remain
expanded when you select another tree node.
• If you select Automatically fully expand navigation tree nodes, all tree nodes will be
expanded. This is equivalent to clicking the Expand All Nodes arrow in the side
navigation bar; see Using the Side Navigation Bar on page 26.
3. Enable or disable prompts when leaving pages with unsaved changes:
Chapter 4: Basic Operations 39