User guide

Table D.5 lists the VT100 ANSI mode and cursor keys for set and reset modes. Encoding and
decoding is supported for all the cursor keys listed.
Table D.5: VT100 ANSI Set and Reset Mode Cursor Keys
Cursor Key Mode Reset Mode Set
Up Esc [A Esc O A
Down Esc [B Esc O B
Right Esc [C Esc O C
Left Esc [D Esc O D
Table D.6 lists the VT100 PF1-PF4 key definitions. Encoding of each listed key is supported;
decoding is not applicable.
Table D.6: VT100 PF1-PF4 Key Definitions
Key Code Sequence
F1 Esc [O P
F2 Esc [O Q
F3 Esc [O R
F4 Esc [O S
Table D.7 lists the ANSI mode control sequences for VT100 terminal emulation and indicates
Avocent encoding/decoding support, where Yes = supported and No = not supported.
Table D.7: VT100 ANSI Mode Control Sequences
Control Sequence Definition Encode/Decode
Esc [Pn; Pn R Cursor Position Report No/No
Esc [Pn D Cursor Backward No/Yes
Esc [Pn B Cursor Down No/Yes
Esc [Pn C Cursor Forward No/Yes
Appendices 423