User guide

To capture the Video Viewer window to your clipboard:
Select File - Capture to Clipboard from the Video Viewer menu or click the Capture to
Clipboard button. The image data is saved to the clipboard.
Displaying Video Viewer Users
NOTE: This procedure is not available if the DSR Remote Operations software is being used.
To display current Video Viewer users:
1. Select View - Connected Users from the Video Viewer menu or click the Connected Users
button. The Users Connected to <device - Video Session number> dialog box appears,
containing a list of all users connected to the Video Viewer window session.
2. Click OK to close the dialog box.
To display a list of users sharing a port or channel:
Select View - List of Shared Users in the Video Viewer menu. Users in stealth mode are
excluded from this display.
Scan Mode
To start scan mode:
In a Units View window (see Accessing Units View windows on page 118), select two or more
target devices that support KVM connections, then click Scan.
Scan mode will start and the Video Viewer windows will appear in the Thumbnail Viewer. A
series of thumbnail frames appear in the Thumbnail Viewer, each containing a small, scaled,
non-interactive version of a target device screen image.
About scan mode
Scan mode moves from one thumbnail image to the next, logging into a device and displaying
an updated device image for a specified length of time (View Time Per Server), before logging
out of that device and moving on to the next thumbnail image. You may specify a scan delay
between thumbnails (Time Between Servers). During the delay, you will see the last thumbnail
image for all devices in the scan sequence, though you won’t be logged into any devices.
When you first launch the Thumbnail Viewer, each frame will be filled with a white
background until a device image is displayed. An indicator light at the bottom of each frame
displays the device status. The default thumbnail size is based on the number of devices in the
scan list.
Chapter 19: Using the Video Viewer 309