User guide

3. Enable the checkboxes for the items to display in the toolbar. Disable the checkboxes for
the items to remove from the toolbar.
4. Click OK to save the changes and close the dialog box.
Video commands
The color depth, scaling and background refresh commands may also be specified in a KVM
session profile; see Video profile settings on page 294. The refresh image button/command
cannot be set in a KVM session profile.
To adjust the color depth:
Select View - Color Depth from the Video Viewer menu, then.select the desired depth.
To change the Video Viewer window resolution:
NOTE: The View - Scaling command is not available if the Video Viewer window is in full screen mode or to non-
primary users of a shared session.
Select the View - Scaling command, then select the desired resolution. The default is 1024 x
768.
To enable or disable background refresh:
1. Select Tools - Session Options from the Video Viewer menu or click the Session Options
button. The Session Options dialog box appears.
2. Click the General tab.
3. Enable or disable the Background Refresh checkbox.
4. Click OK.
You may also use the Refresh Image command.
To refresh the screen:
Click the Refresh Image button in the Video Viewer toolbar or select View - Refresh from the
Video Viewer menu. The digitized video image will be completely regenerated.
Mouse scaling command
Mouse scaling cannot be specified in a KVM session profile.
To prevent potential mouse conflicts, you may configure certain settings on each server
connected to a managed appliance. For details, see the Mouse and Pointer Settings Technical
Brief, which is available on the DSView software DVD and on the Avocent web site.
Chapter 19: Using the Video Viewer 303