User guide

To assign a KVM session profile to multiple target devices:
1. In a Units View window containing target devices (see Accessing Units View windows on
page 118), click the checkbox next to one or more target devices. To change the KVM
session profile for all target devices in the page, click the checkbox to the left of Name at
the top of the list.
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Profile.
4. Select a KVM session profile from the menu.
5. Click Save and then click Close.
Using Menu Commands to Manage Session Settings
KVM session profiles contain settings for the many following operations. In a profile, if the
Allow users to override this setting checkbox is enabled for a setting, or if a profile has not
been assigned to a target device, Video Viewer users connected to that target device may use
the Video Viewer menu commands/buttons described in this section.
General commands
All of the following commands except enabling/disabling full screen mode may also be
specified in a KVM session profile; see General profile settings on page 291.
To specify a key for toggling activation of the menu and toolbar:
1. Select Tools - Session Options from the Video Viewer menu or click the Session Options
button. The Session Options dialog box appears.
2. Click the General tab.
3. In the Menu Activation Keystroke field, select a keystroke from the menu.
4. Click OK. When you disable the menu and toolbar display, pressing the specified key
reenables the display.
To enable keyboard pass through:
1. Select Tools - Session Options from the Video Viewer menu or click the Session Options
button. The Session Options dialog box appears.
2. Click the General tab.
3. Select Pass-through all keystrokes in regular window mode.
4. Click OK.
300 DSView™ 4 Installer/User Guide