User guide

e. In the Avocent Mouse Sync menu, select Enable or Disable. Enabling Avocent Mouse
Sync provides improved mouse tracking on the target device on supported system
configurations. If Avocent Mouse Sync is enabled, it is not necessary to disable mouse
acceleration on the target device. Enable or disable the Allow users to override these
settings checkbox.
f. In the Avocent Mouse Sync Notification, select Display Notification or Do Not
Display Notification to indicate if you want the mouse acceleration pop-up warning to
display when a user launches a KVM session. Users cannot override this setting.
g. If you changed any settings, click Save.
7. To change toolbar settings (see Toolbar profile settings on page 294):
a. Click Toolbar in the side navigation bar. The Toolbar Settings window will open.
b. If this is not the default profile, the Inherit Default Settings checkbox may be enabled
or disabled. When enabled, no other settings in this window may be changed.
c. In the Hide Delay field, select the number of seconds for the toolbar hide delay.
d. To add functions to be displayed in the toolbar, select one or more functions from the
Available Functions column, then click Add. The selected items will move to the
Enabled Functions column.
To add macros to be displayed in the toolbar, select one or more macros from
the Available Macros column, then click Add. The selected items will move to
the Enabled Macros column.
To remove functions or macros from display in the toolbar, select one or more
items from the Enabled Functions or Enabled Macros column, then click
Remove. The selected items will move to the Available Functions or
Available Macros column.
e. Enable or disable the Allow users to override these settings checkbox.
f. If you changed any settings, click Save. The enabled functions will be displayed first
in the toolbar, followed by the enabled macros.
8. To change video settings (see Video profile settings on page 294):
a. Click Video in the side navigation bar. The Video Settings window will open.
b. In the Color Depth field, choose the desired value. Enable or disable the Allow users to
override these settings checkbox.
If users are allowed to override this setting, you may also enable or disable the
Prohibit users from selecting a higher value checkbox. When enabled, users
298 DSView™ 4 Installer/User Guide