User guide

5. Click Save and then click Close. The Sites, Departments or Locations window will open.
To associate or change the association of an existing unit to a site, department or
location:
1. Click the Units tab.
2. Click one of the links listed in Table 15.1 in the side navigation bar to display the
corresponding window for the units you wish to associate, change or remove the
association.
Table 15.1: Links for Managing Sites, Departments or Location Associations
Link Window Changes Site Associations For
A link under Target Devices Target Devices Target devices only
A link under Appliances Appliances Managed appliances only
Sites Units in Site Units
Groups Units in Group Units
A link under Custom Field Units in Custom Fields Units
Recently Accessed Recently Accessed Units Units
3. Click on the name of a unit. The Unit Overview window will open.
4. Click Properties in the side navigation bar, then click Location.
5. From the menus, select the site, department and/or location to associate with the unit. If
you do not wish to associate the unit with any site, department or location choose the top
(empty) item from the menu.
6. Click Save and then click Close.
To display the units associated with a site, department or location:
1. Click the Units tab.
2. To display units associated with a site, click Sites in the side navigation bar. The Units in
Site window will open, with a list of units associated with the first alphabetically-listed
site.
To display units associated with a department, click Departments in the side
navigation bar. The Units in Departments window will open, with a list of units
associated with the first alphabetically-listed department.
Chapter 15: Grouping Units 235